Untitled Document

Indoor Components

*Click here to learn more about "HippoBobo" Play Components

Indoor Parts and Accessories

We can offer different kind of Soft Play Panels, Climbing Events, Ramps, Bridges, Banance, Slideing events, and component to fit your indoor play system.

You can email us at marketing@glossmind.com or call (852) 2797 9297

Balls

Soft and durable "HippoBobo" balls are supply for commercial play.
Size : Dia. 65mm - 80mm

500 balls per bag

Clamps

Soft contained play structures need fittings which are reliable, versatile and affordable. We have a broad range of playground fitting to meet every design situation.

All fitting make by Carbon Steel according to ASTM/A27M with Stainless Steel screws and fit for tube dia. 50mm.

Netting

Used to control playground access on sides and ceiling. Netting is knitted (i.e. not knotted) for safety. Standard colour is black. Widths 1.2m. Sold by the metre.

Steel Pipe

Galvanized pipe in dia. 50mm for structure of soft play.

Pipe Form

Pipe Form are made by PVC form with PVC skin which children can’t pick at or bite pieces off, is easy to clean and goes on looking as new for years. Length can fit for your requirement.

All PVC and form already passed BS5852

Outdoor Components

We can offer different kind of Play Panels, Climbing Events, Ramps, Bridges, Balance, Slideing events, Roofs and component to fit your play system.

Detail information please contact us immediately.

Email : marketing@glossmind.com or

Call : (852) 2797 9297




	Shade Structure

	*Click here to learn more about "HippoBobo" Shade Structure Protection from UV radiation and heat has always been an important issue. It is because sun over-exposure during childhood is the primary risk factory for deadly skin cancer as an adult, shielding our children at the playground and at the pool, is no longer a luxury. We Provide quality outdoor shade systems for: • Playgrounds • Sports Facilities • Parking • Picnic Areas • Pools & Waterparks • Military Clubs We look forward to serving you!

	Safety PVC Floor Mat for indoor

	We provided the PVC floor mat with or without graphic for all indoor equipment where there is a risk of falls. Where matting is applicable it should be fitted to all accessible vertical surfaces to a minimum height of 1.2m from any floor or playing surface. Our Floor Mat size : 1.2M x 4.4M x 50 – 75 mm 1.2M x 1.2M x 50 – 75mm All PVC and Foam is complying with BS5852.

	Safety PVC Wall Padding for indoor

	We provided the PVC Wall Padding with or without graphic for all indoor equipment where there is any risk . Where padding is applicable it should be fitted to all accessible hard surfaces and corner from any playing surface. Our wall padding size for the height of 1.2M x 1.2m x thick 50mm. All PVC and Foam is complying with BS5852. For detail information. Please send the email us at marketing@glossmind.com or call (852) 2797 9297

	Toddler Toys

	*Click here to learn more about "HippoBobo" Toddler Toys “HippoBobo” offering a series of toddler toys for the ages below 5.